Yamaha RY30 Authorized Product Manual page 59

Summary: Selects a pattern number between 0 and
199 for playback. Pattern numbers 0 through 99
can also be selected for recording, or editing.
Settings: Pattern name: see page 28
Tempo: see page 20
Pattern number: 000 . . . 199
Time signature: see page 21
Pattern length: see page 21
Procedure: Use the [INC] and [DEC] keys, the
[DATA] slider, or the numeric keys to select the
desired pattern number.
The selected pattern can be played by press-
ing the [START] key and stopped by pressing
the [STOP/CONTINUE] key. If you press the
[STOP/CONTINUE] key again after stopping
the pattern, playback will resume from the point
at which it was stopped. The [START] key will
always start the pattern from the beginning.
PATTERN SELECT
Notes: More details on selecting and playing pat-
terns are given in the TUTORIALS section,
beginning on page 19. For pattern recording and
editing procedures see page 21.
Patterns 0 through 99 are in RAM memory
and can be recorded and edited by the user.
Patterns 100 through 199 are presets residing in
ROM memory which can not be re-recorded or
edited.
A new pattern number can be selected even
while a previous pattern is playing. In this case,
the new pattern will begin playing once the pre-
vious pattern has finished. During playback both
the current pattern number and the "next" pat-
tern number are shown on the display.
A small letter "w" appearing to the right of
the pattern number indicates that the pattern
contains data. Pattern numbers with no "w" are
blank or have been cleared using the PATTERN
CLEAR function described next.
PATTERN MODE
Pattern mode/Page 01
51