Advanced Techniques
Setting Parameters using Menu Mode
Advanced Techniques
Menu Mode is used to set drum-module parameters and functions, which are arranged into the follow-
ing seven groups.
1-1. Pattern ............................................................ Page 42
1-2. Beats .............................................................. Page 42
1-3. Sound............................................................. Page 42
x
2-1. Pad Sound...................................................... Page 43
2-2. Pad Volume.................................................... Page 43
2-3. Pad Tuning ..................................................... Page 44
2-5. Reverb ........................................................... Page 44
v
5-2. Crosstalk........................................................ Page 49
5-4. Pedal Type ..................................................... Page 50
5-5. Gain ............................................................... Page 50
6-1. Timer .............................................................. Page 51
Basic Menu Mode Procedure
1.
Hold down the Mode switch to turn the "PLAY" and
"TRAINING" on (Menu Mode).
2.
Press the number button corresponding to the group
containing the parameter you wish to set. (Parameter
groups are shown in the hierarchical list on the left.) To
select "1-2. Beats," for example, press the number but-
tons in the order [1][2].
•
When the setting value is less than 10
The number button of the current setting will be fully lit
and the selectable number buttons will be half-lit.
Selectable Settings
•
When the setting value is more than 10
The number buttons flash continuously to indicate the
current setting. For example, when the current setting is
40, the number button lights will flash [4][10].
3.
Enter the new setting.
•
When the setting value is less than 10
Select a new setting using the corresponding number
button.
•
When the setting value is more than 10
Press the TEMPO[+]/[-] button to increase and
decrease the setting values. If you take no action for a
while, the setting is automatically stored.
NOTE
When the setting value is more than 10, you can also use the
number buttons to directly set parameters with numerical val-
ues. To enter the value 105, for example, press the number
buttons in the order [1][10][5]. [10] is used to enter the
value zero. You cannot use [10] to enter the number ten.
DTX402K DTX432K DTX452K Owner's Manual
Current Setting
41