Job 03: Transmit Channel; Job 04: Voice Transmit Channel; Job 05: Voice Note Assign Table Select; Job 06: Voice Note Assign Table Setup - Yamaha RY30 Authorized Product Manual

UTILITY MODE

JOB 03: TRANSMIT CHANNEL

Summary: Determines which of the 16 available
MIDI channels will be used for transmission of
all RY30 voices.
Settings: Channel number: 1 . . . 16
Procedure: Use the [INC] and [DEC] keys, the
[DATA] slider, or the numeric keys to select the
desired channel then press the [ENTER] key.
"Sure" will appear on the display. Press
[ENTER] again. "Complete!" will appear on the
display briefly when the operation is finished.

JOB 04: VOICE TRANSMIT CHANNEL

Summary: Individually sets the MIDI transmit
channel for each of the RY30's 96 internal and
32
card voices.
Settings: Voice: I00 . . . I95 (internal), C00 . . . C31
(card)
Channel number: 1 . . . 16
Procedure: Use the
cursor to the desired parameter. Use the [INC]
and [DEC] keys or the [DATA] slider to set as
required. The numeric keys can also be used to
enter the channel number.
Notes: The ability to set different transmit channels
for each voice makes it possible to have up to 16
different voices controlling independent external
tone generators or other MIDI devices on the
corresponding channels. Make sure that the re-
ceiving devices are set to the appropriate
channels.
72
and keys to move the
JOB 05: VOICE NOTE ASSIGN TABLE
SELECT
Summary: Selects one of the RY30's four note
assign tables.
Settings: Note assign table number: 0 . . . 3
Procedure: Use the [INC] and [DEC] keys, the
[DATA] slider, or the numeric keys to select the
desired note assign table.
Notes: Note assignments determine which MIDI
note number will play which of the RY30's voices.
The RY30's four voice note assignment tables
allow four completely independent sets of
assignments to be maintained in memory for later
recall when needed. The actual assignments are
made using the "VOICE NOTE
SETUP" function, described next.
JOB 06: VOICE NOTE ASSIGN TABLE
SETUP
Summary: Assigns MIDI note numbers to the
RY30's 96 internal and 32 card voices for the
currently selected note assign table.
Settings: Voice: I00 . . . I95 (internal), C00 . . . C31
(card)
Note number: C-2 (000) . . . G8 (127), off
Procedure: Use the
cursor to the desired parameter. Use the [INC]
and [DEC] keys or the [DATA] slider to set as
required. The numeric keys can also be used to
enter note numbers. The instrument pads can be
used to select voices.
ASSIGN
TABLE
and keys to move the