Job 07: Voice Note Assign Table Copy; Job 08: Voice Note Assign Table Clear; Job 09: Pitch Note Assign - Yamaha RY30 Authorized Product Manual

Notes: The RY30 has four separate note assign
tables that can be selected by using the "VOICE
NOTE ASSIGN TABLE SELECT" job described
above. Each of these is completely separate so
you can program four independent groups of note
assignments for different applications.
If the cursor is located at the note number
parameter, a MIDI note number received while
the [-SPACE] key is held will be assigned to the
current voice. This makes it easy to specify note
numbers from a keyboard or other MIDI
controller.

JOB 07: VOICE NOTE ASSIGN TABLE COPY

Summary: Copies the currently selected voice note
assign table to the specified destination table
number.
Settings: Destination table number: 0 . . . 3
Procedure: Use the [INC] and [DEC] keys, the
[DATA] slider, or the numeric keys to select the
destination table number.
Press the [ENTER] key — "Sure" will
appear on the display. Press the [ENTER] key
again to store the table or press [EXIT] to can-
cel the operation. "Complete!" will appear on
the display briefly when the table has been
stored.
Notes: This function is useful when you want to
create a voice note assign table that is only
slightly different from an existing table. Simply
copy the existing table to a new table number,
then make the necessary changes using the
ASSIGN
"VOICE NOTE
described above.
JOB 08: VOICE NOTE ASSIGN TABLE
CLEAR
TABLE SETUP" job
Summary: Clears the currently selected voice note
assign table (i.e. all voice assignments are
turned "off").
Settings: None
Procedure: Press the [ENTER] key — "Sure" will
appear on the display. Press the [ENTER] key
again to clear the table or press [EXIT] to can-
cel the operation. "Complete!" will appear on
the display briefly when the table has been
cleared.
Notes: This function can be used to turn all assign-
ments "off prior to creating a new voice note
assign table that requires only a few assign-
ments.

JOB 09: PITCH NOTE ASSIGN

Summary: Determines which of the RY30 voices
will be pitch-controlled by MIDI note-on events
received on a channel or channels set to
"PITCH" as described in the "RECEIVE
CHANNEL" function on page 71.
Settings: Channel: 01 . . . 16
Voice: I00 . . . I95 (internal), C00 . . . C31 (card)
Procedure: Use the
cursor to the channel or voice parameter. Use
the [INC] and [DEC] keys, the [DATA] slider,
or the numeric keys to set the channel. Use the
[INC] and [DEC] keys, the [DATA] slider, or
the instrument pads to select the voice to be
controlled.
Notes: This function, used in conjunction with the
"RECEIVE CHANNEL" function (page 71),
makes it possible to have up to 16 different
voices pitch-controllable over the corresponding
MIDI channels.
Channel numbers must be the same as chan-
nel numbers set to "PITCH" using the
"RECEIVE CHANNEL" function otherwise the
PITCH NOTE ASSIGN settings will be ignored.
UTILITY MODE
and keys to move the
73