14: Voice Name; 15: Voice Copy - Yamaha RY30 Authorized Product Manual

Summary: Allows a name of up to 8 characters to
be assigned to the selected voice.
Settings: Voice: I00 . . . I95 (internal), C00 . . . C31
(card)
New name: 8 characters
Procedure: Use the
cursor to the voice name or one of the 8 available
character locations within the VOICE NAME
brackets. Use the [INC] and [DEC] keys, the
[DATA] slider, or the instrument pads to to
select the voice number. Use the numeric keys,
the [INC] or [DEC] keys, or the [DATA] slider
to enter the characters for the voice name. The
instrument pads can be used to select the voice.
Summary: Copies the voice data from the specified
source voice number to the specified destination
voice number.
Settings: Source voice number: I00 . . . I95
(internal), C00 . . . C31 (card), P00 . . . P95
(preset)
Destination voice number: I00 . . . I95 (internal)
Procedure: Use the
cursor to the source or destination voice name.
Use the [INC] and [DEC] keys, the [DATA]
slider, or the instrument pads to select the
appropriate voice numbers.
VOICE NAME
and keys to move the
VOICE COPY
and keys to move the
Notes: Each numeric key accesses four different
characters — its number and the remaining three
characters printed on the key. The characters
printed on the key are called in sequence each
time the key is pressed. To enter the letter "H",
for example, press the [2] key three times. The
[CLEAR] key switches between upper and lower
case characters — indicated by a reverse (white
on black) "U" for upper or "L" for lower to the
right of the new voice name.
The [INC] and [DEC] keys and the [DATA]
slider access a complete list of lower and upper
case characters, plus a range of symbols not
available via the numeric keys. The complete list
of characters is given below:
Press the [ENTER] key — "Sure" will
appear on the display. Press the [ENTER] key
again to copy the voice or press [EXIT] to can-
cel the operation. "Complete!" will appear on
the display briefly when the voice has been
copied.
Notes: Any previous data in the destination voice
number will be erased and replaced by the copied
voice data.
The RY30's preset voices are available for
the source voice parameter so that a single voice
can be restored to its preset sound without hav-
ing to use the "LOAD PRESET VOICES" func-
tion (page 76) which reloads
memory.
Voice data cannot be copied to a card voice
number.
VOICE EDIT MODE
Voice edit mode/Page 14
Voice edit mode/Page 15
preset voices into
all
91