03: Wave Level; 04: Pan - Yamaha RY30 Authorized Product Manual

Summary: Independently sets the volume levels of
waves 1 and 2 for the selected voice.
Settings: Voice: I00 . . . I95 (internal), C00 . . . C31
(card)
Wave 1 level: 00 . . . 63
Wave 2 level: 00 . . . 63
Summary: Determines the position in the stereo
sound field in which the sound of each wave in
the selected voice will be heard (left to right).
Settings:Voice: I00.. . I95 (internal), C00 . . . C31
(card)
Wave 1 pan: 00 . . . 32
Wave 2 pan: 00 . . . 32
Procedure: Use the
cursor to the voice name, wave 1 pan, or wave 2
pan parameter. Use the [INC] and [DEC] keys,
WAVE LEVEL
and keys to move the
Procedure: Use the
cursor to the voice name, wave 1 level, or wave
2 level parameter. Use the [INC] and [DEC]
keys, the [DATA] slider, or the numeric keys to
set the wave levels. The [INC] and [DEC]
keys, the [DATA] slider, or the instrument pads
can be used to select the voice.
Notes: A setting of "0" produces no sound while a
setting of "63" produces maximum volume for
the selected wave.
Use this function to set the required balance
between the two waves used in a voice. The
"LEVEL" function described on page 81 sets the
overall level of the voice in relation to other
voices.
PAN
the [DATA] slider, or the numeric keys to set
the pan values. The [INC] and [DEC] keys, the
[DATA] slider, or the instrument pads can be
used to select the voice.
A graphic representation of the pan position
is also given for each wave. As you change the
pan value the vertical bar will appear at the
corresponding position on the graphic display.
Notes: A setting of "16" positions the sound of the
selected wave in the center of the stereo sound
field. Lower values move the sound to the left
while higher values move the sound to the right.
Interesting stereo effects can be produced by
placing the sound of different waves at different
locations in the stereo sound field.
VOICE EDIT MODE
Voice edit mode/Page 03
and keys to move the
Voice edit mode/Page 04
83