Playing A Macro; Other Macro Functions; View; Name - Yamaha RY30 Authorized Product Manual

l Playing a Macro
l Other Macro Functions

View

Name

44
5 . Press [ENTER] to begin recording. "M" will appear to the right of the upper
display line to indicate that macro recording is active. If you started with the
pattern mode selected the display might look something like this:
6. Execute the required keystroke sequence (for this example use either the 10-
or 8-step method given above).
7. Press the [MACRO REC] key to exit the macro record mode.
Any macro can be played simply by pressing the [MACRO] key and then the
appropriate numeric key.
To play the macro recorded in the example given above, press [MACRO]
and then [9] and you'll be taken directly to the VOICE EDIT mode FILTER
RESONANCE job.
In addition to "RECORD," which we used in the preceding example, the [INC]
and [DEC] keys can be used to select the "VIEW" or "NAME" function after
pressing the [MACRO REC] key.
This function is used to view or check the contents of a macro. After selecting
"VIEW" and the macro number you want to view, press the [ENTER] key.
This is what the display should look like if you selected the macro we
recorded in the example above (macro number 9) for viewing. From left to right,
the bottom line of the display indicates that macro number 9 is being viewed, and
that step 00 of the key sequence is the [Voice Edit] key. You can now use the
[INC] and [DEC] keys, the [DATA] slider, or the numeric keys to step for-
wards or backwards through the keystrokes (steps) in the macro to check their
contents.
Press [EXIT] to exit from the VIEW function and return to the initial key
macro display.
This function allows you to give the selected macro a name. The characters for
the name are entered in exactly the same way as for pattern or song names
(pages 28 and 38).
Press [EXIT] to exit from the NAME function and return to the initial key
macro display.