Job 01: Pattern Inst Copy - Yamaha RY30 Authorized Product Manual

Summary: Merges the patterns from the first and
second pattern numbers and stores the result to
the destination pattern number.
Settings: First pattern number: 000 . . . 199
Second pattern number: 000 . . . 199
Destination pattern number: 000 . . . 099
Procedure: Use the
cursor to the first; second, or destination pattern
number. Use the [INC] and [DEC] keys, the
[DATA] slider, or the numeric keys to set the
appropriate pattern numbers.
Press the [ENTER] key — "Sure" will
appear on the display. Press the [ENTER] key
again to merge and store the patterns or press
[EXIT] to cancel the operation. "Complete!"
will appear on the display briefly when the pat-
terns have been merged and stored.
Notes: This function allows you to work on compo-
nents of a pattern separately and then merge
Summary: Allows any of the six pattern jobs
described below to be selected.
Settings: None
Procedure: Press [ENTER] and then use the
[PAGE-] and [PAGE+] keys to select the
desired job.
Press [EXIT] to exit from the pattern job mode
and return to "JOB ?" display (page 07).
PATTERN MERGE
and keys to move the
PATTERN JOB SELECT
them when they're perfect. You could, for
example, create a basic kick, snare, and hi-hat
pattern in one pattern number, then use a sepa-
rate pattern number to record percussion instru-
ments such as timbales. This way you can work on
the various parts without a lot of audio "clutter."
When the parts are refined to perfection, merge
them together.
Both the first and second patterns must have
the same time signature and number of measures.
If a mis-matched time signature is entered,
the "Illegal Input!" error message will appear.
Any previous data in the destination pattern
number will be erased and replaced by the
appended pattern.
If you specify a source pattern that contains
no data, the "!No Data Converted!" error
message will appear on the display when the
operation is executed, and the operation will be
c a n c e l l e d .
"! Memory Full !" will appear on the display
if there is not enough pattern memory available
to complete the operation.
If the pattern size limit is exceeded, the
"!Too Large Pattern!" error message will
appear.
JOB 01: PATTERN INST. COPY
Summary: Copies the part played by the selected
voice from the source pattern to the destination
pattern.
PATTERN MODE
Pattern Mode Page/ 06
Pattern mode/Page 07
55