03: Song Copy; 04: Clear All Songs - Yamaha RY30 Authorized Product Manual

Rhythm programmer
Hide thumbs Also See for RY30:
Table of Contents

Advertisement

SONG MODE
Summary: Copies the song data from the specified
source song number to the specified destination
song number.
Settings: Source song number: 00 . . . 19
Destination song number: 00 . . . 19
Procedure: Use the
cursor to the source or destination song number.
Use the [INC] and [DEC] keys, the [DATA]
slider, or the numeric keys to set the appropriate
song numbers.
Press the [ENTER] key — "Sure" will
appear on the display. Press the [ENTER] key
again to copy the song or press [EXIT] to cancel
the operation. "Complete!" will appear on the
display briefly when the song has been copied.
Summary: Clears (erases) all songs.
Settings: None
Procedure: Press the [ENTER] key — "Sure" will
appear on the display. Press the [ENTER] key
again to clear the songs or press [EXIT] to can-
cel the operation. "Complete!" will appear on
the display briefly when the songs have been
cleared.
64
SONG COPY
and
keys to move the
CLEAR ALL SONGS
Notes: The ability to copy songs is particularly use-
ful when you want to create variations on exist-
ing songs. Copy the song you want to modify to a
new song number, then edit the song as described
on page 34.
Any previous data in the destination song number
will be erased and replaced by the copied song
data.
If you specify a source song that contains no
data, the "!No Data Converted!" error message
will appear on the display when the operation is
executed, and the operation will be cancelled.
''! Memory Full !" will appear on the display if
there is not enough song memory available to
complete the operation.
Notes: This function wipes out all 20 songs at once,
so be sure there's nothing you want to keep in
the song memory before you go ahead and
CLEAR ALL SONGS. For long-term storage you
can always store the data on cassette tape (see
the "CASSETTE SAVE," "CASSETTE VER-
IFY," and "CASSETTE LOAD" functions on
pages 69 and 70), or dump the data to a MIDI
storage device using the "BULK TRANSMIT
function described on page 74.
Song mode/Page 03
Song mode/Page 04

Advertisement

Table of Contents
loading

Table of Contents