Cisco XR 12406 Installation Manual page 46

Line Cards
Figure 1-13
1
1
2
3
Depending on whether the router is configured for nonredundant or redundant
power operation, the router ships with either one or two 14-foot (4.3-m) AC power
cords to connect the PDU to the facility AC power source. AC power cords with
different source AC power plugs are available. (See
For true redundancy, connect each power supply to a separate power circuit
Note
protected by its own circuit breaker.
Cisco XR 12406 Router Installation Guide
1-30
AC Power Distribution Unit
3
Captive screw
AC power cord receptacle A
AC power cord receptacle B
Chapter 1 Cisco XR 12406 Router Overview
4
5
6
4 AC power distribution unit
5 Guide pin
6
Blower module connector
Figure 2-3 on page
2
2-16.)
OL-13831-01