Cisco XR 12406 Installation Manual page 242

Repacking the Router
Install the angle brackets on the sides of the chassis (see
Step 3
a.
b.
c.
d.
Step 4 Place the plastic bag cover over the router (see
Place the accessory kit on top of the router (see
Step 5
Place the cardboard carton over the accessory kit and router (see
Step 6
Secure the cardboard carton to the pallet with plastic-type straps similar to the
Step 7
ones used to ship the router to you (see
The router is ready for shipment.
Cisco XR 12406 Router Installation Guide
B-6
Set the side of the bracket with the three screw holes against the side of the
chassis and align the holes with the holes in the side of the chassis.
Insert and loosely tighten the three screws you saved when the chassis was
unpacked.
Align the bolt holes in the angle brackets with the bolt holes in the pallet base.
Insert and loosely tighten the bolts to secure the brackets to the pallet base.
Appendix B
Figure
Figure B-1).
Figure B-1).
Figure B-3).
Repacking the Router
B-2):
Figure B-1).
OL-13831-01