Cisco XR 12406 Installation Manual page 203

Chapter 5 Maintaining the Router
Reinstall the PEMs:
Step 10
a.
Caution
b.
c.
Figure 5-25
OL-13831-01
Slide each PEM into its bay until it mates with its PDU connector.
To prevent damage to the connectors, do not use excessive force when
inserting the power supply into the chassis.
Close the ejector levers and tighten the captive screws to securely seat the
power supply to the chassis
Repeat steps a. and b. for the second power supply.
Seating a DC Power Supply
Removing and Replacing a DC PDU
(Figure 5-25).
O U TP U T
IN P U T
O K M IS W IR
E
O K
Cisco XR 12406 Router Installation Guide
5-39