Chapter 5
Maintaining the Router
Reinstall the power supplies
Step 13
a.
To prevent damage to the connectors, do not use excessive force when inserting
Caution
the power supply into the chassis.
b.
c.
Figure 5-14
OL-13831-01
Push the power supply into its bay until it mates with its PDU connector.
Close the ejector levers and tighten the captive screws to securely seat the
power supply to the chassis.
Repeat steps a. and b. for the second power supply.
Seating the AC Power Supply
Removing and Replacing an AC PDU
(Figure
5-14):
Cisco XR 12406 Router Installation Guide
5-25