Cisco XR 12406 Installation Manual page 241

Appendix B Repacking the Router
Figure B-2 Securing the Router to the Pallet Base
CIS CO 12
00 0
SERIES
GIGA BIT
SWI TCH
ROU TER
Step 1
Step 2
OL-13831-01
GIG ABIT
ROU TE
PRO CES
SOR
To repack the router, follow these steps:
Place the router on the pallet base.
Install the two anchor clips on the front of the chassis (see
Set the hold-down clips in the bottom holes of the rack-mounting flanges on
a.
either side of the chassis.
Align the bolt holes in the anchor clips with the bolt holes in the pallet base.
b.
Insert and loosely tighten the bolts to secure the anchor clips to the pallet
c.
base.
Cisco XR 12406 Router Installation Guide
Repacking the Router
Figure B-2):
B-5