Cisco XR 12406 Installation Manual page 232

Regulatory, Compliance, and Safety Information
CISPR 22
Canada
English Statement of Compliance
French Statement of Compliance
Europe (EU)
Cisco XR 12406 Router Installation Guide
A-10
Appendix A
You can determine whether your equipment is causing interference by turning it
off. If the interference stops, it was probably caused by the Cisco equipment or
one of its peripheral devices. If the equipment causes interference to radio or
television reception, try to correct the interference by using one or more of the
following measures:
Turn the television or radio antenna until the interference stops.
•
Move the equipment to one side or the other of the television or radio.
•
Move the equipment farther away from the television or radio.
•
Plug the equipment into an outlet that is on a different circuit from the
•
television or radio. (That is, make certain the equipment and the television or
radio are on circuits controlled by different circuit breakers or fuses.)
This apparatus complies with CISPR 22/EN55022 Class B radiated and conducted
emissions requirements.
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
This apparatus complies with EN55022 Class B and EN55024 standards when
used as ITE/TTE equipment, and EN300386 for Telecommunications Network
Equipment (TNE) in both installation environments, telecommunication centers
and other indoor locations.
Cisco XR 12406 Router Technical Specifications and Warnings
OL-13831-01