Cisco XR 12406 Installation Manual page 122

Powering On the Router—First Time
Visually check the LEDs on the two alarm cards
Step 6
LEDs that normally should be off:
•
•
•
•
LEDs that normally should be on:
•
•
•
Figure 3-21
1
2
3
On the console terminal, verify that the console displays the system banner and
Step 7
that the system and all interfaces initialize successfully.
Cisco XR 12406 Router Installation Guide
3-34
One MBUS status LED labeled FAIL
Two CSC status LEDs labeled FAIL
Three SFC status LEDs labeled FAIL
Three router alarm LEDs labeled CRITICAL, MAJOR, MINOR
One MBUS status LED labeled ENABLED
Two CSC status LEDs labeled ENABLED
Three SFC status LEDs labeled ENABLED
Alarm Card LEDs On/Off Conditions
FAIL
ENABLED
0 1 0 1
1 2 3
MBus status LED
CSC status LEDs (two)
SFC status LEDs (three)
Chapter 3
(Figure
2
4 5 6
4
Critical alarm LED
5 Major alarm LED
6 Minor alarm LED
Installing the Cisco XR 12406 Router
3-21):
ALARM
OL-13831-01