Cisco XR 12406 Installation Manual page 200

Removing and Replacing a DC PDU
Remove the PDU from the chassis
Step 6
a.
b.
c.
Figure 5-22
Cisco XR 12406 Router Installation Guide
5-36
Loosen the (4) captive screws on the PDU.
Grasp the PDU and pull it out slightly.
Move the PDU to the left and pivot the right side through the opening to
remove the PDU from the chassis.
Tilting the PDU at a slight angle makes it easier to remove it from the
Note
chassis.
Removing the DC PDU
Chapter 5
(Figure 5-22):
Maintaining the Router
OL-13831-01