Cisco XR 12406 Installation Manual page 180

Removing and Replacing an AC Power Entry Module
Install the new power supply
Step 5
a.
To prevent damage to the power shelf backplane connector, do not use excessive
Caution
force when inserting the power supply into the chassis.
b.
Figure 5-8
Cisco XR 12406 Router Installation Guide
5-16
Slide the power supply into the bay until it mates with its backplane
connector.
Close the ejector levers and tighten the captive screws to securely seat the
power supply to the backplane connector.
Seating the AC Power Supply
Chapter 5
(Figure 5-8):
Maintaining the Router
OL-13831-01