Installing The Shock Absorber - Husqvarna FC 450 2014 Repair Manual

SHOCK ABSORBER, SWINGARM
9
@)
-
Press angle lever toward the rear.
8
-
Press linkage lever downward.
0.
-
Detach springs
I
Spring hook (50305017000) (- p. 220)
(D
-
Remove screw and take off the manifold.
-
Remove screws @ on both sides.
@)
-
Loosen screws on both sides.
@).
-
Remove screw
-
Raise the rear frame slightly and remove the shock absorber toward the top.
Main work
-
Raise the rear frame slightly and insert the shock absorber from above.
-
Position the shock absorber.
-
Mount and tighten screw
Guideline
Screw, top shock
absorber
O.
M10 60 Nm
(44.3 lbf ft)
50
Loctite ® 2701 ™