Installing The Heim Joint - Husqvarna FC 450 2014 Repair Manual

SHOCK ABSORBER, SWINGARM
9

Installing the heim joint

O
-
Remove seal rings on both sides.
-
Press the heim joint against a lock ring using the special tool.
I
Pressing tool (T1207S) (- p. 229)
-
Remove the second lock ring
f)
-
Place special tool underneath and press out heim joint
tool@).
I
Pressing tool (T1 207S) (- p. 229)
-
Position the new heim joint
Guideline
I
Use soft jaws.
I
Pressing tool (T1 206) (- p. 228)
-
Press the heim joint all the way in.
-
Press the heim joint against the lock ring using the special tool.
I
Pressing tool (T1207S) (- p. 229)
-
Mount the second lock ring
(D
-
Mount seal rings on both sides.
8.
O
and the special tool into a vise as shown.
8.
59
(D
with special