Adjusting The Chain Guide; Checking The Chain, Rear Sprocket, Engine Sprocket, And Chain Guide; Enables Different Secondary Ratios With The Same Chain Length; Chain Adjusters - Husqvarna FC 450 2014 Repair Manual

WHEELS
14
14.6.7

Adjusting the chain guide

14.6.8

Checking the chain, rear sprocket, engine sprocket, and chain guide

..
Info
The wide adjustment range of the chain adjusters (32 mm (1 .18 in))

enables different secondary ratios with the same chain length.

Chain adjusters

Finishing work
-
Remove the motorcycle from the lift stand. (..- p. 10)
-
Loosen screw
Condition
Number of teeth: :;; 44 teeth
-
Insert collar bushing
-
Mount and tighten screw@. Tighten screw
Guideline
I
Remaining screws, chassis
Condition
Number of teeth: 2: 45 teeth
-
Insert collar bushing
-
Mount and tighten screw@. Tighten screw
Guideline
I
Remaining screws, chassis
Preparatory work
-
Raise the motorcycle with a lift stand. (..- p. 10)
Main work
-
Shift gear to neutral.
-
Check the rear sprocket and engine sprocket for wear.
If the rear sprocket or engine sprocket are worn:
-
Change the drivetrain kit. (..- p. 1 01)
•
I
400227-01
C,
can be turned by 180
O.
Remove screw@. Swing the chain guide down.
(D
into drill hole f). Position the chain guide.
(D
into drill hole G). Position the chain guide.
Info
The engine sprocket, rear sprocket, and chain should only be
replaced together.
.
°
O.
I10Nm(7.41bf ft)
O.
110 Nm (7.4 lbf ft)
98