Mask, Fender; Removing The Front Fender; Installing The Front Fender; Removing The Start Number Plate - Husqvarna FC 450 2014 Repair Manual

13

MASK, FENDER

13.1 Removin the front fender
13.3

Removing the start number plate

Preparatory work
-
Remove the start number plate. (.- p. 88)
Main work
O
-
Remove screws and @. Remove the front fender.
Main work
-
Position the front fender. Mount and tighten screws
Guideline
I
Remaining screws, chassis
Finishing work
-
Install the start number plate. (.- p. 89)
O
- Take brake line
out of the brake line guide.
-
Remove screw @.Take off the start number plate.
88
O
and @.
110Nm(7.41bf ft)