Motorcycle; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Starting - Husqvarna FC 450 2014 Repair Manual

5

MOTORCYCLE

5.1 Raising the motorc cle with a lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
-
Always place the vehicle on a firm and even surface.
5.2
Removing the motorc�cle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
-
Always place the vehicle on a firm and even surface.
m 5.3

Starting

Danger
Danger of poisoning
-
When running the engine, always make sure there is sufficient ventilation, and do not start or run the engine in an
enclosed space without an effective exhaust extraction system.
Note
High engine speeds in cold engines have a negative effect on the service life of the engine.
Engine failure
-
Always warm up the engine at low engine speeds.
-
Raise the motorcycle at the frame underneath the engine.
I
Lift stand (81329955000) (
✓ Neither wheel is in contact with the ground.
-
Secure the motorcycle against falling over.
401942-01
-
Remove the motorcycle from the lift stand.
-
Remove the lift stand.
-
To park the motorcycle, insert plug-in stand
spindle.
Info
Remove the plug-in stand before riding.
402001-10
Exhaust gases are toxic and inhaling them may result in unconsciousness and/or death.
-
Remove plug-in stand
-
Shift gear to neutral.
Condition
Ambient temperature: < 20 °C (< 68 °F)
-
Pull the cold start button out all the way.
402001-10
,.... p. 227)
O
into the left side of the wheel
O.
10