Changing The Steering Head Bearing - Husqvarna FC 450 2014 Repair Manual

6
FORK, TRIPLE CLAMP
6.32

Changing the steering head bearing

ff
Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire steering range. No
resting locations should be noticeable.
If click positions are noticeable:
-
Adjust the steering head bearing play. ('r p. 41)
-
Check the steering head bearing and change if necessary.
Finishing work
Remove the motorcycle from the lift stand. (- p. 10)
Preparatory work
Raise the motorcycle with a lift stand. (- p. 10)
Remove the front wheel. (- p. 92)
Remove the fork legs. (- p. 14)
Remove the start number plate. (- p. 88)
Remove the front fender. (- p. 88)
Remove the lower triple clamp. (- p. 37)
Main work
Remove the lower bearing race
Press in the new bearing race all the way using a suitable tool.
Remove the upper bearing race @ using a suitable tool.
Press in the new bearing race all the way using a suitable tool.
O
using a suitable tool.
40