Table of Contents
Advertisement
Set up, install, and configure
Connecting the printer to a non‑RJ‑11 wall jack
1
Connect one end of the telephone cable to the line port of the printer.
2
Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.
3
If you want to connect another device with a non‑RJ‑11 connector to the same wall jack, then connect it
directly to the telephone adapter.
Connecting to a distinctive ring service
A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone
number is assigned a different ring pattern.
Note: These instructions apply only to printers that support analog fax. For more information, see
fax" on page
39.
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls >
Answer On.
2
Select a ring pattern.
46
"Supported
Advertisement
Table of Contents
