Lexmark MX931 User Manual page 147

Set up, install, and configure
Installing wireless modules
Installing MarkNet N8372 Wireless Print Server
1
Turn off the printer.
2
Apply isopropyl alcohol to a damp, soft, lint-free cloth, and then wipe the surface around the USB port.
3
Install the wireless module.
Notes:
•
Apply firm pressure to make sure that the tape sticks to the surface of the printer.
•
Make sure that the printer surface is dry and free of condensed moisture.
•
The module is best bonded to the printer after 72 hours.
4
Check for a gap between the module and the printer, then attach the spacer module if necessary.
147