Table of Contents
Advertisement
Use printer menus
Menu item
Separator Sheet Source
Tray [x] (1*)
Multipurpose Feeder
Blank Pages
Do Not Print*
Print
Note: An asterisk (*) next to a value indicates the factory default setting.
Network/Ports
Network Overview
Menu item
Active Adapter
Auto*
Standard Network
Wireless
Network Status
Display Network Status on
Printer
Off
On*
Speed, Duplex
IPv4
All IPv6 Addresses
Reset Print Server
Network Job Timeout
Off
On* (90 seconds)
Banner Page
Off*
On
Scan to PC Port Range
Enable Network Connections
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the paper source for the separator sheet.
Print blank pages in a print job.
Description
Specify the type of the network connection.
Note: Wireless is available only in printers connected to a wireless network.
Show the connectivity status of the printer network.
Show the network status on the display.
Show the speed of the currently active network card.
Show the IPv4 address.
Show all IPv6 addresses.
Reset all active network connections to the printer.
Note: This setting removes all network configuration settings.
Set the time before the printer cancels a network print job.
Print a banner page.
Specify a valid port range for printers that are behind a port blocking firewall.
Enable the printer to connect to a network.
237
Advertisement
Table of Contents
