Set up, install, and configure
Supported applications
•
Scan Center
•
Shortcut Center
•
Card Copy
•
Card Copy
Setting up Scan Center
1
From the home screen, touch Scan Center.
2
Select and create a destination, and then configure the settings.
Notes:
•
When creating a network destination, make sure to validate and adjust the settings until no errors
occur.
•
Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3
Apply the changes.
Creating a shortcut
1
From the home screen, touch Shortcut Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
2
Select a printer function, and then touch Create Shortcut.
Note: The Secure E‑mail function is not supported.
3
Configure the settings, and then touch Save.
4
Type a unique shortcut name.
Note: To avoid clipped names on the home screen, type only up to 25 characters.
5
Touch OK.
The application automatically generates a unique shortcut number.
Note: To launch the shortcut, touch
Setting up Card Copy
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Apps > Card Copy > Configure.
, touch #, and then enter the shortcut number.
33