Table of Contents
Advertisement
Use printer menus
Menu item
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Fax Configuration
Fax Storage Location
NAND
Disk*
Print Configuration
Font Sharpening
0–150 (24*)
Device Operations
Quiet Mode
Off*
On
Device Operations
Panel Menus
Off
On*
Device Operations
Safe Mode
Off*
On
Device Operations
Minimum Copy Memory
20 MB*
30 MB
50 MB
80 MB
100 MB
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set fax to enter Sleep mode whenever the printer determines
that it must.
Set the storage location for all faxes.
Note: This menu item appears only when a hard disk or an
ISD is installed.
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the overall
performance of the printer.
Enable access to the printer menus from the control panel.
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Set the minimum memory allocation for storing copy jobs.
Erase user‑defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time.
188
Advertisement
Table of Contents
