Incomplete Image Transfer To Paper - Xerox Phaser 8400 Service Manual

Incomplete Image Transfer to Paper

Step Question and Actions
1 Use media from the approved media list. Media that is not smooth or too light can
cause this problem, use higher quality or heavier media.
NOTE This problem may occur within the watermark of watermarked paper.
2 Flip over the media, or try a higher quality print mode.
3 Inspect the Maintenance Kit. If necessary, replace the Maintenance Kit.
4 Verify that the Maintenance Cam and Pivot Plate are operating correctly. Test them
using diagnostics.
5 Ensure the Drum Temperature sensor is properly positioned and has no
contamination between it and the Drum surface.
6 Verify the paper preheater temperature using diagnostics.
7 Transfix Load System may be worn, resulting in low transfix pressure. Replace the
Transfix Load Assembly and Transfix Load Arm.
8 Follow the instructions on the "Troubleshooting Printhead Checklist".
Print-Quality Troubleshooting
All of the image does not transfer to
the paper.
0388-72
5-29