Covers; Front Door (Mpt) Assembly - Xerox Phaser 8400 Service Manual

Covers

Front Door (MPT) Assembly

(PL 1.1)
1.
Open the Front Door (MPT) assembly (Tray 1) by pulling out on the handle to
the right side of the door.
2. Remove the right and left stay retainers from the Front Door (MPT).
3. Open the plug cover and disconnect the plug from the right side of Front Door
(MPT).
4. Free the plug wiring from cable retainer on the right side of Front Door (MPT).
5. Carefully remove the Front Door (MPT) assembly(PL1.3), by releasing the left
hinge pin (PL1.4) from the printer frame and sliding the assembly to the right to
remove it.
Note
Do not lose the hinge pins or stay retainers for the front door.
8-4
s8400-183
s8400-184
Phaser 8400 Printer Service Manual