Omron SMARTSTEP 2 R88M-G Series User Manual page 203

 Operating Procedures
1. Displaying Parameter Setting Mode
Key opera-
Display example
tion
rk k k k k0k
Uknk_kskpkd.
pknk_krk0k0.
2. Setting the Parameter Number
Key operation Display example
pknk_k k1k0.
3. Displaying the Parameter Setting
Key operation Display example
k k k k4k0.
4. Changing the Parameter Setting
Key operation Display example
k k k1k0k0.
k k k1k0k0.
The item set for the Default Display (Pn01) is displayed.
Press the Data key to display Monitor Mode.
Press the Mode key to display Parameter Setting Mode.
Use the Shift, Increment, and Decrement keys to set the parameter num-
ber.
If the parameter number is too high, you can change the parameter number
faster by using the Shift key to change the digit. The decimal point will flash
for the digit that can be set.
Press the Data key to display the setting of the parameter.
Use the Shift, Increment, and Decrement keys to change the setting.
Press the Data key to save the new setting.
5-10 User Parameters
Explanation
Explanation
Explanation
Explanation
5
5-18