Teledyne CP Series User Manual page 29

User Manual
CP Series
Version 3.1 – June 2020
This port has the same function that the USB slave port but using RS422 protocol.
The RS 422 connection is made through an HIROSE HR10-7R-6S(73) connector on the Power Box. You
may want to use HIROSE HR10-7P-6P connector on the connection cable side.
Pin layout is as follow:
N° du contact Couleur de fil
1
2
3
4
5
6
Pin labels 1 to 6 are printed on the connector.
See §9 "Communication protocol" for more information about remote control.
1 In the unlikely event where both USB slave and RS422 ports are connected, the Power Box will treat them independently
and answer to all requests in a chronological sequence.
RS 422
PORT
Signaux
Noir +15V
Brun RX+
Blanc RX-
Bleu TX-
Orange TX+
Rouge GND
1
29