Exposure Time Calculator; Interconnection Cable Extension (Per 20M) Up To 100M; Junction Box For Dual Flashing Light; Junction Box For Dual Audible-Flashing Light - Teledyne CP Series User Manual

User Manual
CP Series
Version 3.1 – June 2020
7.9 E
XPOSURE TIME CALCULATOR
ICM order number 00003074.
Unlock code for the exposure time calculator software.
7.10 I
NTERCONNECTION CABLE EXTENSION
100
M
ICM order number 00003438.
Standard extension cables for the interconnection cable are available in lengths
of 20 meter.
7.11 J
UNCTION BOX FOR DUAL FLASHING LIGHT
This accessory allows the user to have two single red flashing lights powered concurrently by the
PowerBox. When it is used, the two flashing lights are connected respectively to "Lamp2" and "Lamp3", as
described in 3.3.5. Thus, it is necessary to adjust the interlocks in order to switch on "Lamp2" and "Lamp3"
during exposure. This can be done by selecting the "Dual Flashlight" standard, as described in 5.4.4, or in
manual mode. If needed, it is also possible to enable the control of both lamps as described in 5.4.3.
7.12 J
UNCTION BOX FOR DUAL
This accessory allows the user to have two single red audible flashing lights powered concurrently by the
PowerBox (Note that is this configuration the orange lamp of the audible flashing light is not
operational).When it is used, the two flashing lights are connected respectively to "Lamp2" and "Lamp3",
( 20
PER M
A -
UDIBLE FLASHING LIGHT
)
UP TO
59