Emergency Stop - Teledyne CP Series User Manual

User Manual
CP Series
Version 3.1 – June 2020
4.2.6 E
MERGENCY
The emitting of X-rays during preheating or while making an exposure, can always be stopped
immediately by pressing the STOP button (9) or by turning OFF the Safety key (12).
It is however not recommended to switch OFF the power with the power switch (11).
When the STOP button is pressed or the Safety key is switched off, the remaining preheating or exposure
time is kept. When the danger situation is cleared and X-ray can be emitted again, the remaining preheating
or exposure time can be finished by pressing the START button again.
S
TOP
36