Powermodule; Powerbox; Mechanical Dimensions - Teledyne CP Series User Manual

User Manual
CP Series
Version 3.1 – June 2020
information will be very helpful to ICM's service centers to in diagnosing any failures and assist in
determining the cause of a defect.
3.2 P M
OWER
The PowerModule converts a 380Vdc power supplied by the PowerBox into a signal that will generate the
requested kV and mA in the CP SERIES generator. This PowerModule is a standard component and is
identical for all Site-X CP generators. It can easily be replaced, and no further configuration or calibration
is required, even on site.
Required in some countries, ICM makes a flashing light on the generator available by standard. The flashing
light is positioned on the PowerModule next to the interconnection socket. The behavior of the lamp (when
it should flash or when it should be ON) can be programmed from the PowerBox Menu.
3.3 P B
OWER
3.3.1 M
ECHANICAL DIMENSIONS
ODULE
OX
24