Settings; Change Su Code - Teledyne CP Series User Manual

User Manual
CP Series
Version 3.1 – June 2020
• Gen Model: Generator Model (Currently only CP SERIES is available)
Select the 'Confirm' item and press OK to store the set of entries.
5.4 S
ETTINGS
The settings menu gives access to various settings of parameters and
equipment behavior. Superuser access rights are required to enter into
this menu.
The following chapters will explain each of the 'Settings' menu items in
more detail. In each of the Settings sub-menu there is a "Confirm" line
that allows you to save the changes you've made. However, if you've
made some changes and escape out of the submenu without confirming
the changes, a message will pop-up, asking you if you want to save or
cancel the modifications you've done.
5.4.1 C
HANGE
Allow to change the SuperUser code. You have to enter the old code,
and twice the new code (to avoid any typo mistake). Old (or default) code
will be permanently deleted so make sure you note down the new code
somewhere.
SU
CODE

Settings

Change SU code

Doors control
Lamps control
Interlock
Bluetooth
Date and Time
Language
Software
Screen
Carousel
Limitation
Gen lamp BLINK
Fan mode Max power
Prewarning 5s
Units metric
Key beep OFF
**********
Confirm
41