IFP-2000 Installation Manual
4.6.1
Mounting the RA-2000
This section of the manual describes mounting the remote annunciator. The annunciator can
be flush- or surface-mounted.
4.6.1.1 Flush Mounting
This section of the manual describes flush mounting.
Follow these steps to flush mount the RA-2000
1. The back box dimensions are 9-9/32" w x 8-3/8" h. The minimum depth 2". The back box
can be mounted prior to the complete installation of the RA-2000 using any of the mount-
ing holes shown in Figure 4-12.
4-14
Mounting Holes
Mounting Holes
Figure 4-12 Back Box Mounting Holes
firealarmresources.com
151430