2. Remove knockout holes as needed for wires. See Figure 4-13 for backbox knockout loca-
tions
Wire Knockouts
3. Wire the Annunciator board to the main control panel. See Figure 4-9.
4. Attach the annunciator and door assembly to back box as shown in Figure 4-14 using the
supplied screws.
Figure 4-14 Attaching Annunciator/Door Assembly to Backbox
151430
Wire Knockouts
Figure 4-13 Back Box Knockout Locations
firealarmresources.com
Control Panel Installation
Wire Knockouts
4-15