Settings Required To Use E-Mail Function - Gestetner DSm755 General Settings Manual

Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.55 "Interface Settings"
p.65 "File Transfer"

Settings Required to Use E-mail Function

This section describes necessary set items for sending e-mail.
Ethernet
This section describes necessary set items for sending e-mail with Ethernet cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network Ethernet Speed
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
Interface Settings/Network Host Name
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
Setting Item
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3/IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
Program / Change /
Delete E-mail Message
Network Settings
Setting Requirements
Mandatory
Mandatory
As required
As required
As required
As required
Mandatory
As required
Mandatory
As required
As required
As required
Mandatory
As required
As required
As required
As required
As required
As required
As required
1
17