Gestetner DSm755 General Settings Manual page 86

System Settings
To start an LDAP search, make sure that the items listed below are set. For
other items, check your environment and make any necessary changes.
• Server Name
• Search Base
• Port Number
• Authentication
2
• Search Conditions
To use the LDAP server in Administrator Tools, select [On] under LDAP server.
This function supports LDAP Version 2.0 and 3.0. Ver 2.0 does not support
High Security authentication.
❖ LDAP Search
You can specify whether or not to use the LDAP server for searching.
• On
• Off
If you select [Off], [LDAP Search] will not appear on the searching display.
❖ AOF (Always On)
Specify whether or not to use Auto Off.
• On
• Off
❖ Preheating level setting
Set the level of the preheating mode.
Level
1
2
❖ Firmware Version
You can check the version of the software installed in this machine.
❖ Network Security Level
For details about this function, consult your administrator.
❖ Auto Erase Memory Setting
For details about this function, consult your administrator.
❖ Erase All Memory
For details about this function, consult your administrator.
❖ Delete All Logs
For details about this function, consult your administrator.
❖ Transfer Log Setting
For details about this function, consult your administrator.
78
Approximate warm-up time
3 sec
15 sec