Using Ftp To Connect - Gestetner DSm755 General Settings Manual

Registering Addresses and Users for Scanner Functions

Using FTP to Connect

Note
❒ To register a shared folder configured in Windows, see "Using SMB to Con-
nect".
❒ To register a folder in an NetWare server, see "Using NCP to Connect".
Reference
p.181 "Using SMB to Connect"
p.193 "Using NCP to Connect"
Registering a Folder
A
Press [System Settings].
6
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Check that [Program / Change] is selected.
E
Select the name whose folder you want to register.
You can search by the registered name, user code, folder name, or e-mail address.
F
Press [Auth. Info], and then press [Next].
G
Press [Specify Other Auth. Info] on the right side of Folder Authentication.
H
Press [Change] under Login User Name.
I
Enter the login user name, and then press [OK].
J
Press [Change] under Login Password.
K
Enter the password, and then press [OK].
L
Enter the password again to confirm, and then press [OK].
M
Press [Folder].
188