Gestetner DSm755 General Settings Manual page 121

❖ Stamp Format
You can specify how each of stamp is printed.
• Stamp Position
You can specify where to print the stamp.
• Top Left
• Top Center
• Top Right
• Center Left
• Center
• Center Right
• Bottom Left
• Bottom Center
• Bottom Right
• Stamp Position
You can adjust the position of the stamp within the available range as
shown below.
Metric version:
• "Top Left"...T/B: 4-144mm, L/R: 4-144mm
• "Top Center"...T/B: 4-144mm, L/R: 72-72mm
• "Top Right"...T/B: 4-144mm, L/R: 4-144mm
• "Center Left"...T/B: 72-72mm, L/R: 4-144mm
• "Center"...T/B: 72-72mm, L/R: 72-72mm
• "Center Right"...T/B: 72-72mm, L/R: 4-144mm
• "Bottom Left"...T/B: 4-144mm, L/R: 4-144mm
• "Bttm Center"...T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"...T/B: 4-144mm, L/R: 4-144mm
Inch version:
• "Top Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Top Center"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Top Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Center Left"...T/B: 2.8"-2.8", L/R: 0.1"-5.7"
• "Center"...T/B: 2.8"-2.8", L/R: 2.8"-2.8"
• "Center Right"...T/B: 2.8"-2.8", L/R: 0.1"-5.7"
• "Bottom Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Bttm Center"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Bottom Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
Stamp
3
113