Gestetner DSm755 General Settings Manual page 131

❖ Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make
copies of scanned originals first, and then automatically proceed scanning re-
maining originals.
• On
You can leave the machine unattended to make copies, but sorted pages
will not be sequential.
• Off
When memory becomes full, the machine stops operation allowing you to
remove the copy pages delivered on the output tray.
❖ Letterhead Setting
If you select [Yes] in this function, the machine rotates the image correctly.
• Yes
• No
Orientation-fixed (top to bottom) or two-sided paper might not be printed
correctly depending on how the originals and paper are placed.
❖ Staple Position
Specify which Top 2 staples or Bottom shown on the initial display with pri-
ority.
The optional 3,000Sheet Finisher, or Booklet Finisher is required to use this
function.
• Top 1
• Center
• Left 2
• Top 2
• Bottom 1
• Slant
• Off
❖ Punch Type
Specify which punch type (2 holes or 3 holes) has priority to be shown on the
initial display.
The optional 3,000Sheet Finisher, or Booklet Finisher is required to use this
function.
• 2 Holes Left
• 2 Holes top
• 3 Holes left
• 3 Holes Top
• 4 Holes Left
• 4 Holes Top
• Off
Input/Output
3
123