Gestetner DSm755 General Settings Manual page 52

System Settings
❖ System Status/Job List Display Time
You can specify how long to display the System Status and Job List display for.
• On: 15 second(s)
• Off
By selecting [On], you can specify a display time between 10 and 999 seconds.
❖ Key Repeat
2
You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
• Off
• Normal
• Repeat Time: Medium
• Repeat Time: Long
❖ Z-fold position
If you specify Z-folding, set the fold-back position in 1 mm (0.1") increments.
The setting ranges of the folding position for each paper size are shown be-
low:
• Metric version:
• A3: 2 - 25 mm
• B4 JIS: 2 - 40 mm
• A4: 2 - 10 mm
• 11 × 17: 2 - 20 mm
1
• 8 /
Default: 2 mm
• Inch version:
• A3: 0.1" - 1.0"
• B4 JIS: 0.1" - 1.6"
• A4: 0.1" - 0.4"
• 11 × 17: 0.1" - 0.8"
1
• 8 /
Default: 0.1"
Note
❒ If the Panel Key Sound setting is [Off], the beeper does not sound, whatever
the Warm-up Beeper setting.
❒ The Function Reset Timer setting is ignored if Interleave is set for Print Prior-
ity.
Reference
p.3 "Accessing User Tools (System Settings)"
"Function Compatibility", Copy/Document Server Reference
44
× 14: 2-35 mm
2
× 14: 0.1" - 1.4"
2