Displaying Ais Target Data - Furuno FR-8062 Operator's Manual

4.5

Displaying AIS Target Data

Place the cursor on the active target that you want to know its data.
Bearing, range, CPA
Course, speed, TCPA
The data for the chosen target is displayed in data box A or B. The box is chosen on a first-in, first-
out basis. For example, if both data box A and data box B are currently showing data and an AIS
target is selected to show its data, the data in data box A will be erased and replaced with the data
of the newly selected AIS target.
To remove a target's data, choose the appropriate data box and press the CANCEL/HL OFF key.
0.5
3
NM
+ 110.1°R 2.525 NM
A
B
Data box A
Data box (A or B)
Vector reference
Vector time
TRUE 5 min
A
NAME: PEGASUS
LENGTH: 100M BEAM: 45M
°
BRG 123.4 R RNG 23.45NM CPA 10.00NM
°
CSE 303.4 M SPD 12.34kt
AIS data
+
AIS Target
+
+
Data box B
MMSI of vessel
Name of
vessel
MMSI: *********
TCPA 10:00
4. AIS OPERATION
Length, Beam
of vessel
4-3