Table 7-3 Dhcp Ethernet Setup Menu Fields; Table 7-4 Lan Tcp/Ip Setup Menu Fields - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

Follow the instructions in the next table on how to configure the DHCP fields.
FIELD
DHCP This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and
relays requests and responses between the remote server and the
clients.
When set to Server, the following items need to be set:
Configuration:
Client IP Pool This field specifies the first of the contiguous addresses in the IP
Starting address pool.
Address
Size of Client This field specifies the size, or count of the IP address pool.
IP Pool
Primary DNS Type the IP addresses of the DNS servers. The DNS servers are
Server passed to the DHCP clients along with the IP address and the subnet
mask.
Secondary
DNS Server
DHCP Server If Relay is selected in the DHCP field above, then type the IP address
Address of the actual, remote DHCP server here.
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
FIELD
TCP/IP Setup:
IP Address
IP Subnet Mask
RIP Direction
LAN Setup

Table 7-3 DHCP Ethernet Setup Menu Fields

Table 7-4 LAN TCP/IP Setup Menu Fields

Enter the IP address of your ZyWALL in dotted decimal notation
Your ZyWALL will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the ZyWALL.
Press [SPACE BAR] and then [ENTER] to select the RIP direction.
Options are: Both, In Only, Out Only or None.
DESCRIPTION
DESCRIPTION
ZyWALL 2 and ZyWALL 2WE
EXAMPLE
Server
192.168.1.33
EXAMPLE
192.168.1.1
(default)
255.255.255.0
Both
(default)
32
7-7