ZyXEL Communications PRESTIGE 2302RL Quick Start Manual

P-2302r series voip station gateway
Hide thumbs Also See for PRESTIGE 2302RL:

Advertisement

Quick Links

P-2302R Series
VoIP Station Gateway
Quick Start Guide
Version 3.60
6/2005

Advertisement

Table of Contents
loading

Summary of Contents for ZyXEL Communications PRESTIGE 2302RL

  • Page 1 P-2302R Series VoIP Station Gateway Quick Start Guide Version 3.60 6/2005...
  • Page 2 P-2302R Series Overview This Quick Start Guide covers the Prestige (P-2302R) and (P-2302RL) models. It explains how to use your Prestige to make phone calls through the Internet. See your User’s Guide for more information on all features. The P-2302RL’s lifeline feature adds regular phone services (that do not use the Internet). The following figure shows your Prestige (A) connected to the modem or router that provides your Internet connection (B).
  • Page 3: Hardware Connections

    P-2302R Series 2 Hardware Connections 1 LAN: Connect a computer or an Ethernet switch to this port with an Ethernet cable. 2 WAN: Connect a broadband modem or router to this port with an Ethernet cable. 3 LINE: (P-2302RL only). Use telephone wire to connect this port to the telephone jack. This is a FXO (Foreign Exchange Office) port.
  • Page 4: Initial Configuration

    P-2302R Series 3 Initial Configuration In this section you will access your Prestige and configure it for Internet access and making phone calls through the Internet. Instructions are also provided for configuring the P-2302RL to make regular calls. 1 Launch your web browser. Enter “192.168.1.1” as the web site address. 2 Click Login.
  • Page 5: Internet Access Setup

    P-2302R Series 3.1 General Setup (Optional) This screen is optional. You can just click Next. System Name is for identifying the Prestige. You can enter your computer's "Computer Name". Domain Name: Manually enter a domain name if you want to. You can also leave it blank or set to whatever may have displayed automatically.
  • Page 6 P-2302R Series 3.2.2 PPP over Ethernet If you are not using Ethernet encapsulation and are given a username and password, you are using PPP over Ethernet encapsulation. Enter the information provided. Select Nailed-Up Connection when you want your connection up all the time (this could be expensive if your ISP bills you for Internet usage time instead of a flat monthly fee).
  • Page 7 P-2302R Series 3.4 SIP Account 1 Setup Note: You should have a voice account already set up. Fill in the fields with information from your voice service provider. Leave the default settings in fields for which no information was provided (except if otherwise specified). Note: This screen configures SIP account 1.
  • Page 8: Speed Dial Configuration

    P-2302R Series 3.5 Speed Dial Configuration Click PHONE BOOK in the navigation panel and then Speed Dial. Speed dial provides shortcuts for dialing frequently used (VoIP) phone numbers. You can use speed dial entries for peer-to- peer calls or SIP numbers that use letters. Select a speed dial key combination.
  • Page 9: Lifeline Configuration

    P-2302R Series 3.6 Lifeline Configuration (P- 2302RL) Click PHONE BOOK in the navigation panel and then Lifeline. PSTN Pre-fix Number: If you want to make a regular call when the PWR/VoIP LED is orange, dial the prefix number that you configure here and the phone number.
  • Page 10: Troubleshooting

    P-2302R Series 5 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn Make sure that you have the correct power adaptor connected to the Prestige and an on when you connect appropriate power source. Make sure that the power source is turned on. Check all cable the Prestige’s power.
  • Page 11 9 Close the Network Connections screen. Viewing Your Product’s Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.

This manual is also suitable for:

Prestige p-2302rPrestige p-2302rl

Table of Contents