ZyWALL 2 and ZyWALL 2WE
10.3 Remote Node Profile Setup
The following explains how to configure the remote node profile menu.
10.3.1 Ethernet Encapsulation
There are two variations of menu 11.1 depending on whether you choose Ethernet Encapsulation or
PPPoE Encapsulation. You must choose the Ethernet option when the WAN port is used as a regular
Ethernet. The first menu 11.1 screen you see is for Ethernet encapsulation shown next.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Server IP= N/A
Figure 10-2 Menu 11.1: Remote Node Profile for Ethernet Encapsulation
FIELD
Rem Node
Name
Active
Encapsulation
10-2
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Table 10-1 Fields in Menu 11.1
Enter a descriptive name for the remote node. This field can be up
to eight characters.
Press [SPACE BAR] and then [ENTER] to select Yes (activate
remote node) or No (deactivate remote node).
Ethernet is the default encapsulation. Press [SPACE BAR] and then
[ENTER] to change to PPPoE or PPTP encapsulation.
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= No
DESCRIPTION
EXAMPLE
LAoffice
Yes
Ethernet
Remote Node Setup