The following table describes the diagnostic tests available in menu 24.4 for your ZyWALL and associated
connections.
FIELD
Ping Host
WAN DHCP Release
WAN DHCP Renewal
Internet Setup Test
Reboot System
Host IP Address=
Enter the number of the selection you would like to perform or press [ESC] to cancel.
System Information and Diagnosis
Figure 21-11 WAN & LAN DHCP
Table 21-4 System Maintenance Menu Diagnostic
Enter 1 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the Host IP Address field below.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings.
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to the Internet Access chapter for
more details. This feature is only available for dial-up connections using
PPPoE or PPTP encapsulation.
Enter 11 to reboot the ZyWALL.
If you entered 1 in Ping Host, then enter the IP address of the computer
you want to ping in this field.
ZyWALL 2 and ZyWALL 2WE
DESCRIPTION
21-13